Please disregard. I have been
educated by Mark S. I was "expecting" the damper to set flush with the seal.
Bobby
From: Bobby J. Hughes
Sent: Sat
9/17/2005 5:31 PM
To: Rotary motors in aircraft
Subject:
RD-C Drive Adapter Plate for Renesis
One the first test fit of the C Drive
to my Renesis I have a .130 space between the adapter plate o-ring seal and the
damper plate face. I have checked the damper three time and the washer
configuration is correct. Any one else experience this problem.
Thanks,
Bobby