Mailing List flyrotary@lancaironline.net Message #26237
From: kevin lane <n3773@comcast.net>
Subject: Re: [FlyRotary] Re: Side starter options
Date: Mon, 29 Aug 2005 10:19:27 -0700
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
perhaps you could make the hole quite a bit larger and then make an offcenter bushing that could simply be rotated to adjust the gear lash tolerance, since alignment on the other axis isn't critical.
Kevin Lane  Portland, OR
e-mail-> n3773@comcast.net
----- Original Message -----
From: Al Gietzen
Sent: Sunday, August 28, 2005 10:44 PM
Subject: [FlyRotary] Re: Side starter options
 
 
  If need be, you can oversize the new mounting hole a bit so you can adjust the mesh before tightening down the bolts.

 

Good luck,

 

Al

 

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster