for health reasons (certainly not
financial reasons!) I am going to sell my RV-8 project. I have a
turrentine rebuilt 20b, totally overhauled, never run, with aluminum wrap over
intake(6 tubes), parts for a 3" throttle body, and a 321 s/s exhaust with a spin
tech muffler. on front is a brand new 2.85 RD-1C. my engine mount is by
fred breese, built for the 2.13 psru actually. I also have a custom belly
radiator approx, 27x8x6" with cross-over cooling. I also modified the
water pump inlet to not point straight up. my oil cooler is stock 13B and has
just been overhauled by a California company, so it looks practically
new.
I will sell the psru,
radiator, oil cooler, and muffler separately.
yes, I have an
airframe that is built up to needing the finish kit, with aux outboard wing
tanks(outboard bays add 12 gals each). I glued and riveted all the skins
like some rocket builders do now. I have the lightweight aluminum landing
gear. I planned to put in a rocket style turtledeck( see brian milani), so
I removed the upper hoops from the rear bulkheads. this would be little work to
restore to original if desired.
I will work on prices
and pictures this week. I should have lots of time since I totaled my van
yesterday and have to walk now!(so much for airport visits, 17 miles
away). never sleep and drive!(and we think cell phones are
dangerous!)