|
Congratulations to both Tommy and Hank for your first flights. Looks like there will be several rotaries flying this year, I know of two more that are almost ready. This is great! Fred
At 07:30 PM 8/1/2003 -0400, you wrote:
Today, 08/01/03 I completed the first flight in my rotary powered Lancair 235
from Half Moon Bay Airpoprt in CAlifornia.
The flight was uneventful with the following exceptions. These Lancair
airplanes are REALLY twichy on the controla.
1. I found that when i pushed the transmit button on my radio the rudder
trim went to full left deflection. Bit of a surprise there until I figured out
what was happening. The radio worked OK but I quit talking.
2. The coolant temperature went to 240 deg. F. / oil to 230 deg F.
These temps. did not happen during taxi testing but I was unbable to keep the
power up for more than 30 to 45 seconds without a takeoff.
3. Minor oil leak at rear seal on the PSRU.
All other items appeared nominal but due to the high temps. I cut the flight
short to stop and consider the problem.
Hank Huddleston LNC 235 Rotary N644H
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|