----- Original Message -----
Sent: Thursday, March 24, 2005 10:28
PM
Subject: [FlyRotary] Report on
underdriven Waterpump pulley
Ed and All,
Ok guys here is the straight skinny !! Received the "Star Racing"
pulley
today (ordered Monday the 21st).......It is a beautiful piece of machine
work
(obviously CNC), hard anodized in black and a perfect match for the
eccentric
shaft pulley from "Racing Beat" that most of us use.......Perfect fit on
the 86 to
88 13b pump with the 17 mm pilot.......will be a simple job to bore to 19
mm for
those using the 89 to 91 or Cosmo 13b and 20B pump.......Looks just like
the
attached PDF........Great service from the "Star" parts dept.........They
are in
business to sell parts mainly to guys that buy their race
cars........They did
not ask what type of vehicle I had but it might be wise to not mention
that
ours are aircraft........Off road would be a prudent answer probably so
as not
to dry up a parts source.......Price was $74.32 plus UPS
shipping........Contact
"Star" at the following E-mail and phone #........FWIW
(PS- I asked about a quanity discount.....They said their markup
was not
enough to allow it)
From: "Star Race Cars Parts Department" <
fmparts@starmazda.com>
To: "Kelly
Troyer" <
keltro@att.net>
Subject: Re: Waterpump pulley
Date: Fri, 18 Mar 2005 21:03:33 +0000
Here is a couple of pictures with
some approximate dimensions of our water pump pulley.
Our part # is 050-521and costs
74.32.Please email back if your
interested(include a fax#
if you have one)
thanks
Jason Lindsey
Star Race CarsParts Dept.
(818) 686-3356
--
Kelly Troyer
Dyke
Delta/13B/RD1C/EC2
--------------
Original message from keltro@att.net (Kelly Troyer): --------------
OK Guys, If there is anyone still planning on using old fashioned
"V" belts
anda mechanical waterpump listen up.......After detailed analysis (with
a ruler
and calipers) I have found out that the "Star Racing" large diameter
water
pump pulley is 5 inches in diameter and is designed to be used with
the
reduced diameter "Racing Beat" excentric shaft pulley used by most
of
us with 13B rotary (86-91) vintage.......The "Star" pulley is the
largest that
can be used with the "Racing Beat" pulley and probably should be
considered
a must have item for those using the RD1C, 2.85 redrive and planning
on
extended running at or above 6500 rpm.......IMHO......The use of this
pulley will
keep the pump well away from its cavitation rpm and reduce the
power needed
to pull it at high rpm.......The "Star" pulley has a 17mm (.669in)
pilot which
fits the 86-88 13B waterpump.......If you have a 89-91 13B , 13B or 20B
Cosmo
pump its pilot is 19mm (.748in) which can be bored out
easily......Before
everyone runs out and buys one of these let me order one and verify
all
I have guessed about here........FWIW
Kelly Troyer
>> Homepage:
http://www.flyrotary.com/
>> Archive:
http://lancaironline.net/lists/flyrotary/List.html