Hi Tracy,

Sounds great.  Put me on the list for upgraded EM2 and EC2 chips as
soon as they are available.  Is the new "Cold Start" feature included
also?  You may have this whole set-up thing idiot proof by the time I
get my engine running!

Bob (need all the help I can get) White

On Wed, 16 Mar 2005 11:22:20 -0500
"Tracy Crook" <lors01@msn.com> wrote:

> MessageThe EC2 with the auto programming mode hardware is in layout at the PC assembly facility that I use.  Today's test is an alternate approach that uses the EM2 to monitor mixture and calculate MAP table corrections.  It then sends the corrections over the serial data link to the EC2.
>
>   The good news is that this approach will allow current EC2s to auto program if it is connected to an EM2 with the new feature.  Old EM2s will be upgradeable to auto program.
>
> Conceptually, auto programming was fairly easy to do.   The hard part was making it relatively goof-proof.  Some of the aftermarket automotive EFI units have an auto program mode but Bruce Turrentine found that they were so error prone as to be unusable.  Experienced help was almost always needed to set them up correctly.
>
> Tracy (hoping real world results are as good as bench tests indicate)


--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (real soon)