|
Message
The coil bank has a wiring harness that takes 4 wires
from
each coil and merges them into a 7-wire harness/plug. I am curious
as
to the pin-out of the 7 plug harness, and what the mating plug (to
match
it) identifier would be..
Hi
Dave,
The diagram that John
posted has everything you need. Notice also that it includes a part number
for the part of the harness that you need. That portion has the mating
plug, and pigtail wires, though you will still have to separate the power wires
if you don't want all your coils running off the same 12V source. I left
mine tied together, but it's one of those little nagging things that I'll
probably change some day.
Cheers,
Rusty (catching
up)
|