|
|
in your photo notice how Tracy's adapter plate has two holes drilled on two sides and one on the other? I could see nothing that these aligned with on the flex plate. I'm not sure what the holes are for, balancing perhaps? The instructions don't mention them, but I am assuming their position doesn't matter? I also could find no reason to take the planetary gear stuff all apart, so left it all together as it was shipped. I did make sure the needle bearings were aligned correctly. Am I missing something?
Kevin Lane Portland, OR
e-mail-> n3773@comcast.net
web-> http://home.comcast.net/~n3773
(browse w/ internet explorer)
----- Original Message ----- From: "David Staten" <Dastaten@earthlink.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Saturday, February 12, 2005 2:36 AM
Subject: [FlyRotary] Re: 1 step forward, 2 steps back...
More pictures....
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Homepage: http://www.flyrotary.com/
Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|