|
Tracy
I am also looking at making some kind of mount on
centerline just under the rudder bars on my 9A to mount my EC2 (large print
edition). Do I need to make some kind of blast tube provision for cooling?
I have also given some thought to mounting it behind one of the seat backs,
which would still fall well within the 10 feet that you just mentioned. That
should also be a cooler area if shaded from the sun.
Best Regards Dean
----- Original Message -----
Sent: Thursday, January 13, 2005 4:23
PM
Subject: [FlyRotary] Re: EC-2
location
John,
There is no reasonable limitation on length of wires from EC2 to
coils. Are you interpreting the instructions as saying there
is?
Anything less than 10 feet should be no problem.
Tracy
----- Original Message -----
Sent: Thursday, January 13, 2005 5:14
PM
Subject: [FlyRotary] EC-2
location
Tracy; I started to read the directions on the
controller location and
discovered that I need to mount the controller
nearly 36 inches from the
coils to get past the fuel tank to a place
behind the panel. If this is
excessive I'll have to look into a
counsel of sorts between the rudder
pedals which might save 12
inches. Originally I considered mounting on the
firewall, behind a
heat shield with a scat tube for cooling. It now appears
that this
not an option. Thank you for any comments.
JohnD
---
Outgoing mail is certified Virus Free.
Checked by AVG
anti-virus system (http://www.grisoft.com).
Version:
6.0.832 / Virus Database: 566 - Release Date:
1/10/05
>> Homepage: http://www.flyrotary.com/
>>
Archive: http://lancaironline.net/lists/flyrotary/List.html
|