Mailing List flyrotary@lancaironline.net Message #12817
From: Al Gietzen <ALVentures@cox.net>
Subject: RE: [FlyRotary] Re: EWP
Date: Thu, 11 Nov 2004 16:08:53 -0800
To: 'Rotary motors in aircraft' <flyrotary@lancaironline.net>

Subject: [FlyRotary] Re: EWP

 

Did you account for the fact that the 20B pump might be belted to run in the reverse direction than the 13Bs? I can’t remember my 20B belt layout anymore……wonder if the alternator does too.

Marc W.

 

Water pump and alternator turn the same direction as the e-shaft.

 

Al

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Al Gietzen
Sent:
Wednesday, November 10, 2004 12:13 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: EWP

 

Subject: [FlyRotary] Re: EWP

 

Al,
Good data, but for clarification, aren't you running a 13B pump on your 20B?  Are you running stock main pulley or an undersized pulley?  The 20B pump should flow more gpm due to a slightly larger impeller.  Also, comparing a 20B eccentric pulley with a 13B from an 89 n/a engine, the 20B pulley is larger, which should also increase flow, up to the point of cavitation.

Mark S.

Mark;

 

Yes, I have a 13B pump housing; I’m not sure what impeller.  All I know is Dave Atkins billed it as “high performance”.  The pump pulley and the e-shaft pulley are the same size, which I believe is 11 - 12 cm.  I can’t confirm right now because I’d have to take the cowl off to check.

 

Al

 

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster