> Does anybody have two EGT sensors, how they
> are mounted and where do you get them?
Hi Buly,
The EM2 manual explains how to make your own thermocouples from thermocouple
wire. The EGT sensor I have came with a Westach instrument, but basically
it's just a thermocouple wire hooked to a bolt (probe) which is held in the
exhaust stream by a clamp around the exhaust pipe with a hole for the bolt.
I'm not sure where you could put a second sensor in a turbo installation
unless you drilled the cast manifold. I added a second sensor on the turbo
heat shield.
John